Symons cone crusher is also called spring cone crusher. It is the earliest cone crusher in the world. It is also the most widely used crusher in the world. Our company's Symons cone crusher is based on the introduction and absorption of German technology. According to the needs of customers, based on the principle of layer pressure crushing and the design and development of the concept of more abrasion, the high -tech concept design and development Integrated modern high -performance crusher.
When the cone crusher works, the rotation of the motor is a rotary movement through the rotation shaft and the cone crusher of the cone through the band wheels or axis, the cone crusher transmission shaft and the cone crusher. As a result, the broken wall of the broken cone is close and sometimes leaving the surface of the rolling wall that is fixed on the adjustment cover, causing the ore to be continuously impacted in the crushing cavity, squeezing and bending to achieve the crushing of the ore. The motor rotates with an umbrella gear driver, so that the broken cone is used for a spinning motion. The crushing cone is sometimes close to the fixed cone to complete the crushing and discharge. When the connection between the support cover and the frame is tightened by the spring. When the metal blocks such as metal blocks fall into the crusher, the spring will cause compression and deformation, discharge foreign objects to achieve insurance and prevent machine damage. When the cone crusher cannot be overloaded through the crushing cavity or the machine is overloaded by a certain reason, the cone crusher spring insurance system achieves insurance, and the cone crusher excretes increases. Foreign objects are discharged from the crushing cavity of the cone crusher. For example, the foreign body card can use the cavity system in the exhaust ore, which continues to increase the exhaust ore, and the foreign body discharge the cone crusher crushing cavity. Under the action of spring, the cone crusher automatically resets the ore port, and the cone crusher machine resumes normal work. The surface of the crushing cavity is covered with wear -resistant high manganese steel lining plate. The size of the ore outlet is adjusted by hydraulic pressure or manual manual.
