The sand making machine is a device used for sand making. It uses different working principles to achieve the crushing and sand making of the material. Among them, the vertical shock crusher (sand making machine) and the roller sand making machine are two common sand making equipment.
The vertical shock crusher (sand making machine) is a high-performance sand making equipment. Its working principle is quickly accelerated in high-speed rotating impelios, and The cloth of the cloth was thrown out. First of all, the part of the material surrounded by the splitter was broken, and then the other parts of the material was shocked together, thereby achieving the broken and sand making of the material.
The roller sand making machine is a commonly used crushing device. It crushes the raw material into the required sand grain particles by rotating and squeezing the roller. The roller sand machine is mainly composed of the feed port, crushing cavity, roller, adjustment device, transmission device and outlet. The raw material enters the crushing cavity through the feast and is then squeezed and broken by the roller. The roller is composed of two parallel installed cylinders, and the roller rotation is driven through the motor and belt transmission device. The speed and gap of the roller can be adjusted as needed to achieve the broken effect of different particle size. During the crushing process, the raw materials were sandwiched between the roller, and the effect of squeezing and friction was gradually broken into smaller particles. The broken materials are adjusted by adjusting the device, and then the roller sand machine is left by the outlet port.
In summary, the working principle of the sand making machine is mainly based on the rapid acceleration of materials in high -speed rotating impelings, and the material is crushed and sand making the material in a high -speed impact. At the same time, the roller sand making machine crushes the raw material into the required sand grain particles by rotating and squeezing the roller.